Home > Tools and Testing Instruments > Meters and Testing Instruments > Clamp Meters > SC680 WIRELESS POWER CLAMP METER

SC680 – 600 AC/DC Swivel Clamp Meter Dual Display l Power l LPF

Part Number

152884

Description

SC680 – 600 AC/DC Swivel Clamp Meter Dual Display l Power l LPF. Power Meter for HVACR with Direct Integration with Job Link® System App. Whether you’re working on small circuitry in mini-splits or on large commercial units, the new SC680 is packed with everything you need to install, service, and troubleshoot any HVACR system. The SC680 is the top of the line digital clamp meter with wireless functionality for the HVACR professional. Send your electrical measurements directly to the Job Link® System mobile app. Leave the meter behind a closed blower door and view the current measurement on your mobile device. Help determine system efficiency by directly measuring power consumption (W) of the system. Use this value to inform your customer of energy saving measures you can take to help them save money on their energy bills. The SC680 is the only meter you’ll need for troubleshooting mini-split systems. Dual Type K temperature ports to measure entering/exiting air temperatures and measure frequency (Hz) directly with clamp jaw. Reach those cramped mini-split connectors with the included RCT2 probe tips for voltage and resistance measurements.

Additional Information

Application

AC-DC Current Clamp Meter

Display

10000 count dual display

Backlight

5 minute duration with auto-off, blue color

Overrange

“OL” or “-OL” is displayed

Measurement rate

3.3 times per second, nominal

Zero

Automatic

Operating environment

32°F to 122°F (0°C to 50°C) at <70% relative humidity

Storage temperature

-4°F to 140°F (-20°C to 60°C), 0 to 80% RH (with battery removed)

Accuracy

Stated accuracy @ 73°F±9°F (23°C±5°C), <75%RH

Temperature coefficient

0.1 x (specified accuracy) per °C [0°C to 19°C (32°F to 66°F), 28°C to 50° C(82°F to 122°F)]

APO (Auto Power Off)

Approx. 30 minutes

Power

Single standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22

Battery life

100 hours typical alkaline (No wireless, no backlight)

Low battery indication

Battery icon blinks and “LO.bt” is displayed when the battery voltage drops below the operating level

Dimensions

301.5mm(H) x 79.5mm(W) x 50.0mm(D)

Weight

Approx. 480g including battery

Altitude

Up to 6562 ft (2000m)

Overload protection

1000VDC or 750VAC rms unless otherwise stated

Test leads

Use UL listed test leads that comply to UL61010-031 rated CATIV 600V, CATIII 1000V or above

Documents

Instruction Manual
Manufacturer Catalog Document

Features

Hang your SC680 clamp meter to any metallic surface with the heavy-duty magnet. When the job is done, store your test leads in the back case for tidy and convenient storage. See both voltage and amperage readings at the same time on the large dual display
Verify the order of 3-phase voltage lines with just two leads. Capture L1-L2 and L1-L3 to check that motor lines are correctly installed with Phase Rotation test.
Take more accurate VAC and AAC readings on variable frequency drives with True RMS sensing technology. Measure the starting amp draw of a compressor with Inrush current mode.
Illuminate the way with a powerful LED built into the clamp jaw. Easily see your measurements with the bright blue backlight on the display. Safely change functions with the backlit illuminated dial. Take measurements more safely with one hand using the s
Measures Power (kW)
Use on variable frequency drives (VFDs)
True RMS & Low Pass Filter for VAC/Hz
Test Diodes and Resistance up to 50MO
AC/DC Amps
Dual Temp
Swivel Clamp
Lead Storage
Molex tip leads for small power connectors
Includes: SC680 Clamp Meter, RCT2 Molex Probe Tips, ADLS2 Silicone Leads, ASA2 Gator Clip Leads, (2) ATB1 Type K Thermocouples, (2) Velcro Straps, 9V Alkaline Battery, ANC7 Protective Padded Case, Operator’s Manual